修改了Web后台的部分界面，增加了HAmqtt中的总电量传感器，后台新增mqtt上报频率设置

mico-os/makefiles/OpenOCD/mw3xx/wmcore.cfg

@@ -0,0 +1,90 @@
+#
+# Copyright (C) 2008-2014, Marvell International Ltd.
+# All Rights Reserved.
+#
+
+# OpenOCD config script for mc200 and mw300
+
+set CHIP_RAM_START   0x00100000
+
+# yhb changed to support SWD
+proc swj_newdap {chip tag args} {
+ if [using_hla] {
+     eval hla newtap $chip $tag $args
+ } elseif [using_jtag] {
+     eval jtag newtap $chip $tag $args
+ } elseif [using_swd] {
+     eval swd newdap $chip $tag $args
+ }
+}
+
+# yhb set SWD
+transport select swd
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME wmcore
+}
+
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
+   set  _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16kB
+if { [info exists WORKAREASIZE] } {
+   set  _WORKAREASIZE $WORKAREASIZE
+} else {
+   set  _WORKAREASIZE 0x4000
+}
+
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 32MHz,
+# and it has been found not to work reliably at 5MHz,
+# so use F_JTAG = 3MHz
+adapter_khz 2000
+
+adapter_nsrst_delay 100
+if {[using_jtag]} {
+jtag_ntrst_delay 100
+}
+
+
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x4ba00477
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME -rtos auto
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+if { [info exists CONFIG_FLASH] } {
+   flash bank wm0.flash mrvlqspi 0x0 0 0 0 $_TARGETNAME 0x46010000
+   flash bank wm1.flash mrvlqspi 0x400000 0 0 0 $_TARGETNAME 0x46090000
+}
+
+#gdb_report_data_abort enable
+
+$_TARGETNAME configure -event gdb-attach {
+    echo "MiCO: GDB ATTACHED"
+    reset halt
+    mww 0x480C0100 0x00c89346
+}
+
+#shutdown OpenOCD daemon when gdb detaches
+$_TARGETNAME configure -event gdb-detach { reset halt; mww 0x480C0100 0x0; sleep 5; resume; shutdown }
+
+#yhb copy from stm32f4x.cfg
+#reset_config srst_nogate
+
+# if srst is not fitted use SYSRESETREQ to
+# perform a soft reset
+cortex_m reset_config sysresetreq