Update main.py

README.md

@@ -91,28 +91,25 @@ curl -sSL https://github.com/kxgx/2.13-Ink-screen-clock/raw/main/bin/install.sh
 PiSugar 3官方文档 https://github.com/PiSugar/PiSugar/wiki/PiSugar-3-Series#software-installation
 ```Bash
 sudo apt-get update
-sudo apt install -y git
-sudo apt-get install -y netcat*
-sudo apt-get install -y python3-pip
-sudo apt-get install -y python3-pil
-sudo apt-get install -y python3-numpy
-sudo apt install -y python3-gpiozero
+sudo apt-get install -y git pigpio i2c-tools netcat* gawk python3-dev python3-pip python3-pil python3-numpy python3-gpiozero python3-pigpio build-essential
 sudo pip3 install spidev borax pillow requests --break-system-packages
 wget https://cdn.pisugar.com/release/pisugar-power-manager.sh
 bash pisugar-power-manager.sh -c release
 ```
-#### 傻瓜式安装命令和执行启动文件：
+#### 安装命令和执行启动文件组合命令：
 ```Bash
-sudo apt-get update && sudo apt install -y git && sudo apt-get install -y python3-pip && sudo apt-get install -y python3-pil && sudo apt-get install -y python3-numpy && sudo apt install -y python3-gpiozero && sudo apt-get install -y netcat* && sudo pip3 install spidev borax pillow requests --break-system-packages && wget https://cdn.pisugar.com/release/pisugar-power-manager.sh && bash pisugar-power-manager.sh -c release && cd ~/ && git clone https://github.com/kxgx/2.13-Ink-screen-clock.git && cd ~/2.13-Ink-screen-clock/bin/ && sudo chmod +x start.sh && sudo ./start.sh
+sudo apt-get update && sudo apt-get install -y git pigpio i2c-tools netcat* gawk python3-dev python3-pip python3-pil python3-numpy python3-gpiozero python3-pigpio build-essential && sudo pip3 install spidev borax pillow requests && wget https://cdn.pisugar.com/release/pisugar-power-manager.sh && bash pisugar-power-manager.sh -c release && cd ~/ && git clone https://github.com/kxgx/2.13-Ink-screen-clock.git && cd ~/2.13-Ink-screen-clock/bin/ && sudo chmod +x start.sh && sudo ./start.sh
 ```
 ##### 使用国内仓库：
 ```Bash
-sudo apt-get update && sudo apt install -y git && sudo apt-get install -y python3-pip && sudo apt-get install -y python3-pil && sudo apt-get install -y python3-numpy && sudo apt install -y python3-gpiozero && sudo apt-get install -y netcat* && sudo pip3 install spidev borax pillow requests --break-system-packages && wget https://cdn.pisugar.com/release/pisugar-power-manager.sh && bash pisugar-power-manager.sh -c release && cd ~/ && git clone https://gitee.com/xingguangk/2.13-Ink-screen-clock.git && cd ~/2.13-Ink-screen-clock/bin/ && sudo chmod +x start.sh && sudo ./start.sh
+sudo apt-get update && sudo apt-get install -y git pigpio i2c-tools netcat* gawk python3-dev python3-pip python3-pil python3-numpy python3-gpiozero python3-pigpio build-essential && sudo pip3 install spidev borax pillow requests && sudo pip3 install spidev borax pillow requests --break-system-packages && wget https://cdn.pisugar.com/release/pisugar-power-manager.sh && bash pisugar-power-manager.sh -c release && cd ~/ && git clone https://gitee.com/xingguangk/2.13-Ink-screen-clock.git && cd ~/2.13-Ink-screen-clock/bin/ && sudo chmod +x start.sh && sudo ./start.sh
+```
+###### 注意
+```Bash
+# 如果使用的是非lite系统请在pip3安装部分添加
+--break-system-packages
 ```
-
-总体采用局刷方案,程序运行后一直处于程序的获取新数据的过程中,当发现数据变化后即开始自动局刷。
-
-特别注意:
 在代码文件第三十三行,此次代码需要更改,否则将展示默认城市天气数据
 # 效果展示
-![image](https://github.com/kxgx/2.13-Ink-screen-clock/raw/main/pic/1736672578025.jpg)
+总体采用局刷方案,程序运行后一直处于程序的获取新数据的过程中,当发现数据变化后即开始自动局刷。
+![image](https://github.com/kxgx/2.13-Ink-screen-clock/raw/main/pic/1736749257603.jpg)

bin/install.sh

@@ -185,7 +185,7 @@ install_packages() {
     echo "更新源列表失败" >&2
     exit 1
   fi
-  if ! sudo apt-get install -y git pigpio netcat* gawk python3-dev python3-pip python3-pil python3-numpy python3-gpiozero python3-pigpio build-essential; then
+  if ! sudo apt-get install -y git pigpio i2c-tools netcat* gawk python3-dev python3-pip python3-pil python3-numpy python3-gpiozero python3-pigpio build-essential; then
     echo "软件包安装失败" >&2
     exit 1
   fi

bin/main.py

@@ -235,7 +235,7 @@ try:
     getWeath()#天气获取函数开始运行
     epd = epd2in13_V4.EPD() #初始化
     epd.init()#设定屏幕刷新模式
-    epd.Clear(0xFF) #清除屏幕内容
+    #epd.Clear(0xFF) #清除屏幕内容
 ##################屏幕初始化#########################   
     logging.info("Width = %s, Height = %s", format(epd.width), format(epd.height)) #打印屏幕高度及宽度
     logging.info("Initialize and clear the display")#屏幕开始准备相关展示
@@ -244,7 +244,7 @@ try:
     Basic_refresh() #全局刷新
     Partial_refresh() #局部刷新
     epd.init()
-    #epd.Clear(0xFF)
+    epd.Clear(0xFF)
     epd.sleep()
 except IOError as e:
     logging.info(e)