GitHub/zTC1
1
0
Fork 0
mirror of https://github.com/oopuuu/zTC1.git synced 2025-12-17 15:38:14 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
9f9d4c7a561603c54bcfd31401beea24b6ae1e82
zTC1/mico-os/platform/MCU/STM32F2xx/peripherals/platform_i2c.c

740 lines
25 KiB
C
Raw Blame History

/**
******************************************************************************
* @file paltform_i2c.c
* @author William Xu
* @version V1.0.0
* @date 05-May-2014
* @brief This file provide I2C driver functions.
******************************************************************************
* UNPUBLISHED PROPRIETARY SOURCE CODE
* Copyright (c) 2016 MXCHIP Inc.
*
* The contents of this file may not be disclosed to third parties, copied or
* duplicated in any form, in whole or in part, without the prior written
* permission of MXCHIP Corporation.
******************************************************************************
*/
#include "platform.h"
#include "platform_peripheral.h"
#include "stm32f2xx.h"
#include "platform_logging.h"
/******************************************************
* Constants
******************************************************/
#define I2C_FLAG_CHECK_TIMEOUT ( 1000 )
#define I2C_FLAG_CHECK_LONG_TIMEOUT ( 1000 )
//#define I2C_USE_DMA
#define DMA_FLAG_TC(stream_id) dma_flag_tc(stream_id)
#define DMA_TIMEOUT_LOOPS (10000000)
/******************************************************
* Enumerations
******************************************************/
/******************************************************
* Type Definitions
******************************************************/
/******************************************************
* Structures
******************************************************/
/******************************************************
* Variables Definitions
******************************************************/
/******************************************************
* Function Declarations
******************************************************/
static OSStatus i2c_address_device( const platform_i2c_t* i2c, const platform_i2c_config_t* config, int retries, uint8_t direction );
static OSStatus i2c_wait_for_event( I2C_TypeDef* i2c, uint32_t event_id, uint32_t number_of_waits );
static OSStatus i2c_transfer_message_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message );
#ifdef I2C_USE_DMA
static OSStatus i2c_rx_with_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message );
static OSStatus i2c_tx_with_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message );
#else
static OSStatus i2c_tx_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message );
static OSStatus i2c_rx_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message );
#endif
/******************************************************
* Function Definitions
******************************************************/
OSStatus platform_i2c_init( const platform_i2c_t* i2c, const platform_i2c_config_t* config )
{
OSStatus err = kNoErr;
I2C_InitTypeDef I2C_InitStructure;
platform_mcu_powersave_disable( );
require_action_quiet( i2c != NULL, exit, err = kParamErr);
// Init I2C GPIO clocks
RCC_APB1PeriphClockCmd( i2c->peripheral_clock_reg, ENABLE );
err = platform_gpio_enable_clock( i2c->pin_scl );
require_noerr(err, exit);
err = platform_gpio_enable_clock( i2c->pin_sda );
require_noerr(err, exit);
RCC_APB2PeriphClockCmd( RCC_APB2Periph_SYSCFG, ENABLE );
// Reset the I2C clock
RCC_APB1PeriphResetCmd( i2c->peripheral_clock_reg, ENABLE );
RCC_APB1PeriphResetCmd( i2c->peripheral_clock_reg, DISABLE );
// GPIO Configuration
platform_gpio_set_alternate_function( i2c->pin_scl->port, i2c->pin_scl->pin_number, GPIO_OType_OD, GPIO_PuPd_NOPULL, i2c->gpio_af );
platform_gpio_set_alternate_function( i2c->pin_sda->port, i2c->pin_sda->pin_number, GPIO_OType_OD, GPIO_PuPd_NOPULL, i2c->gpio_af );
#ifdef I2C_USE_DMA
// Enable the DMA clock
RCC_AHB1PeriphClockCmd( i2c_mapping[device->port].tx_dma_peripheral_clock, ENABLE );
// Configure the DMA streams for operation with the CP
i2c_dma_init.DMA_Channel = i2c_mapping[device->port].tx_dma_channel;
i2c_dma_init.DMA_PeripheralBaseAddr = (uint32_t)&i2c_mapping[device->port].i2c->DR;
i2c_dma_init.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
i2c_dma_init.DMA_MemoryInc = DMA_MemoryInc_Enable;
i2c_dma_init.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
i2c_dma_init.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
i2c_dma_init.DMA_Mode = DMA_Mode_Normal;
i2c_dma_init.DMA_Priority = DMA_Priority_VeryHigh;
//dma_init.DMA_FIFOMode = DMA_FIFOMode_Enable;
//dma_init.DMA_FIFOThreshold = DMA_FIFOThreshold_Full;
i2c_dma_init.DMA_MemoryBurst = DMA_MemoryBurst_Single;
i2c_dma_init.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
i2c_dma_init.DMA_Memory0BaseAddr = (uint32_t) 0; // This parameter will be configured during communication
i2c_dma_init.DMA_DIR = DMA_DIR_MemoryToPeripheral; // This parameter will be configured during communication
i2c_dma_init.DMA_BufferSize = 0xFFFF; // This parameter will be configured during communication
DMA_DeInit( i2c_mapping[device->port].rx_dma_stream );
DMA_DeInit( i2c_mapping[device->port].tx_dma_stream );
// Clear any pending flags, disable, and clear the Tx DMA channel
//DMA_ClearFlag( i2c_mapping[device->port].tx_dma_stream, CP_TX_DMA_FLAG_FEIF | CP_TX_DMA_FLAG_DMEIF | CP_TX_DMA_FLAG_TEIF | CP_TX_DMA_FLAG_HTIF | CP_TX_DMA_FLAG_TCIF );
DMA_Cmd( i2c_mapping[device->port].tx_dma_stream, DISABLE );
DMA_Cmd( i2c_mapping[device->port].rx_dma_stream, DISABLE );
// Clear any pending flags, disable, and clear the Rx DMA channel
//DMA_ClearFlag( i2c_mapping[device->port].rx_dma_stream, CP_RX_DMA_FLAG_FEIF | CP_RX_DMA_FLAG_DMEIF | CP_RX_DMA_FLAG_TEIF | CP_RX_DMA_FLAG_HTIF | CP_RX_DMA_FLAG_TCIF );
#endif
// Initialize the InitStruct for the CP
I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;
I2C_InitStructure.I2C_OwnAddress1 = 0xA0;
I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
if ( config->speed_mode == I2C_LOW_SPEED_MODE )
{
I2C_InitStructure.I2C_ClockSpeed = 10000;
}
else if ( config->speed_mode == I2C_STANDARD_SPEED_MODE )
{
I2C_InitStructure.I2C_ClockSpeed = 100000;
}
else if ( config->speed_mode == I2C_HIGH_SPEED_MODE )
{
I2C_InitStructure.I2C_ClockSpeed = 400000;
}
// Enable and initialize the I2C bus
I2C_Cmd( i2c->port, ENABLE );
I2C_Init( i2c->port, &I2C_InitStructure );
#ifdef I2C_USE_DMA
// Enable DMA on the I2C bus
I2C_DMACmd( i2c->port, ENABLE );
#endif
exit:
platform_mcu_powersave_enable( );
return err;
}
#ifdef I2C_USE_DMA
static uint32_t dma_flag_tc( int stream_id )
{
const uint32_t transfer_complete_flags[]=
{
/* for every stream get a transfer complete flag */
[0] = DMA_FLAG_TCIF0,
[1] = DMA_FLAG_TCIF1,
[2] = DMA_FLAG_TCIF2,
[3] = DMA_FLAG_TCIF3,
[4] = DMA_FLAG_TCIF4,
[5] = DMA_FLAG_TCIF5,
[6] = DMA_FLAG_TCIF6,
[7] = DMA_FLAG_TCIF7,
};
return transfer_complete_flags[stream_id];
}
#endif
bool platform_i2c_probe_device( const platform_i2c_t* i2c, const platform_i2c_config_t* config, int retries )
{
OSStatus err = kNoErr;
platform_mcu_powersave_disable();
require_action_quiet( i2c != NULL, exit, err = kParamErr);
err = i2c_address_device( i2c, config, retries, I2C_Direction_Transmitter );
I2C_GenerateSTOP( i2c->port, ENABLE );
exit:
platform_mcu_powersave_enable();
return ( err == kNoErr) ? true : false;
}
#ifdef I2C_USE_DMA
static OSStatus i2c_dma_config_and_execute( mico_i2c_device_t* device, mico_i2c_message_t* message, bool tx_dma )
{
uint32_t counter;
/* Initialize the DMA with the new parameters */
if ( tx_dma == true )
{
/* Enable DMA channel for I2C */
I2C_DMACmd( i2c_mapping[device->port].i2c, ENABLE );
/* TX DMA configuration */
DMA_DeInit( i2c_mapping[device->port].tx_dma_stream );
/* Configure the DMA TX Stream with the buffer address and the buffer size */
i2c_dma_init.DMA_Memory0BaseAddr = (uint32_t)message->tx_buffer;
i2c_dma_init.DMA_DIR = DMA_DIR_MemoryToPeripheral;
i2c_dma_init.DMA_BufferSize = (uint32_t)message->tx_length;
DMA_Init(i2c_mapping[device->port].tx_dma_stream, &i2c_dma_init);
/* Enable DMA channel */
DMA_Cmd( i2c_mapping[device->port].tx_dma_stream, ENABLE );
/* wait until transfer is completed */
/* TODO: change flag!!!!,wait on a semaphore */
counter = DMA_TIMEOUT_LOOPS;
while ( DMA_GetFlagStatus( i2c_mapping[device->port].tx_dma_stream, DMA_FLAG_TC(i2c_mapping[device->port].tx_dma_stream_id) ) == RESET )
{
--counter;
if ( counter == 0 )
{
return kGeneralErr;
}
}
/* Disable DMA and channel */
I2C_DMACmd( i2c_mapping[device->port].i2c, DISABLE );
DMA_Cmd( i2c_mapping[device->port].tx_dma_stream, DISABLE );
}
else
{
/* Enable dma channel for I2C */
I2C_DMACmd( i2c_mapping[device->port].i2c, ENABLE );
/* RX DMA configuration */
DMA_DeInit( i2c_mapping[device->port].rx_dma_stream );
/* Configure the DMA Rx Stream with the buffer address and the buffer size */
i2c_dma_init.DMA_Memory0BaseAddr = (uint32_t)message->rx_buffer;
i2c_dma_init.DMA_DIR = DMA_DIR_PeripheralToMemory;
i2c_dma_init.DMA_BufferSize = (uint32_t)message->rx_length;
DMA_Init(i2c_mapping[device->port].rx_dma_stream, &i2c_dma_init);
/* Enable DMA channel */
DMA_Cmd( i2c_mapping[device->port].rx_dma_stream, ENABLE );
/* wait until transfer is completed */
counter = DMA_TIMEOUT_LOOPS;
while ( DMA_GetFlagStatus( i2c_mapping[device->port].rx_dma_stream, DMA_FLAG_TC(i2c_mapping[device->port].rx_dma_stream_id) ) == RESET )
{
--counter;
if ( counter == 0 )
{
return kGeneralErr;
}
}
/* disable DMA and channel */
I2C_DMACmd( i2c_mapping[device->port].i2c, DISABLE );
DMA_Cmd( i2c_mapping[device->port].rx_dma_stream, DISABLE );
}
return kNoErr;
}
static OSStatus i2c_dma_transfer( mico_i2c_device_t* device, mico_i2c_message_t* message )
{
OSStatus result;
uint32_t counter;
int i = 0;
if ( message->combined == true )
{
/* combined transaction case, please refer to Philips I2C document to have an understanding of a combined fragment */
/* some chips( authentication and security related chips ) has to be addressed several times before they acknowledge their address */
for ( i = 0; i < message->retries; i++ )
{
/* generate a start condition and address a device in write mode */
I2C_GenerateSTART( i2c_mapping[device->port].i2c, ENABLE );
/* wait till start condition is generated and the bus becomes free */
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_MODE_SELECT, I2C_FLAG_CHECK_TIMEOUT );
if ( result != kNoErr )
{
return kTimeoutErr;
}
if ( device->address_width == I2C_ADDRESS_WIDTH_7BIT )
{
/* send the address and R/W bit set to write of the requested device, wait for an acknowledge */
I2C_Send7bitAddress( i2c_mapping[device->port].i2c, (uint8_t) ( device->address << 1 ), I2C_Direction_Transmitter );
/* wait till address gets sent and the direction bit is sent and */
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED, I2C_FLAG_CHECK_LONG_TIMEOUT );
if ( result == kNoErr )
{
break;
}
}
else
{
//TODO
/* send 10 bits of the address and wait for an acknowledge */
}
}
if ( i == message->retries )
{
return kTimeoutErr;
}
/* configure dma tx channel for i2c */
i2c_dma_config_and_execute( device, message, true );
/* wait till the byte is actually sent from the i2c peripheral */
counter = 1000;
while ( I2C_GetFlagStatus( i2c_mapping[device->port].i2c, I2C_FLAG_BTF ) == RESET )
{
--counter;
if ( counter == 0 )
{
return kGeneralErr;
}
}
/* generate start condition again and address a device in read mode */
/* some chips( authentication and security related chips ) has to be addressed several times before they acknowledge their address */
for ( i = 0; i < message->retries; i++ )
{
/* generate a start condition */
I2C_GenerateSTART( i2c_mapping[device->port].i2c, ENABLE );
/* wait till start condition is generated and the bus becomes free */
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_MODE_SELECT, I2C_FLAG_CHECK_TIMEOUT );
if ( result != kNoErr )
{
return kTimeoutErr;
}
if ( device->address_width == I2C_ADDRESS_WIDTH_7BIT )
{
/* send the address and R/W bit set to write of the requested device, wait for an acknowledge */
I2C_Send7bitAddress( i2c_mapping[device->port].i2c, (uint8_t) ( device->address << 1 ), I2C_Direction_Receiver );
/* wait till address gets sent and the direction bit is sent and */
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED, I2C_FLAG_CHECK_LONG_TIMEOUT );
if ( result == kNoErr )
{
break;
}
}
else
{
//TODO
/* send 10 bits of the address and wait for an acknowledge */
}
}
if ( i == message->retries )
{
return kTimeoutErr;
}
/* receive data from the slave device */
if ( message->rx_length == 1 )
{
/* disable acknowledgement before we start receiving bytes, this is a single byte transmission */
I2C_AcknowledgeConfig( i2c_mapping[device->port].i2c, DISABLE );
}
else
{
/* enable acknowledgement before we start receiving bytes, this is a single byte transmission */
I2C_AcknowledgeConfig( i2c_mapping[device->port].i2c, ENABLE );
}
/* start dma which will read bytes */
i2c_dma_config_and_execute( device, message, false );
/* maybe we will have to wait on the BTF flag!!! */
}
else
{
/* read or write transaction */
/* some chips( authentication and security related chips ) has to be addressed several times before they acknowledge their address */
for ( i = 0; i < message->retries; i++ )
{
/* generate a start condition */
I2C_GenerateSTART( i2c_mapping[device->port].i2c, ENABLE );
/* wait till start condition is generated and the bus becomes free */
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_MODE_SELECT, I2C_FLAG_CHECK_TIMEOUT );
if ( result != kNoErr )
{
return kTimeoutErr;
}
if ( device->address_width == I2C_ADDRESS_WIDTH_7BIT )
{
/* send the address of the requested device, wait for an acknowledge */
I2C_Send7bitAddress( i2c_mapping[device->port].i2c, (uint8_t) ( device->address << 1 ), ( ( message->tx_buffer ) ? I2C_Direction_Transmitter : I2C_Direction_Receiver ) );
/* wait till address gets sent and the direction bit is sent */
if ( message->tx_buffer )
{
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED, I2C_FLAG_CHECK_LONG_TIMEOUT );
}
else
{
result = i2c_wait_for_event( i2c_mapping[device->port].i2c, I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED, I2C_FLAG_CHECK_LONG_TIMEOUT );
}
if ( result == kNoErr )
{
break;
}
}
else
{
//TODO
/* send 10 bits of the address and wait for an acknowledge */
}
}
if ( i == message->retries )
{
return kTimeoutErr;
}
if ( message->tx_buffer )
{
/* write transaction */
/* configure dma tx channel for i2c */
i2c_dma_config_and_execute( device, message, true );
/* wait till the byte is actually sent from the i2c peripheral */
counter = 1000;
while ( I2C_GetFlagStatus( i2c_mapping[device->port].i2c, I2C_FLAG_BTF ) == RESET )
{
--counter;
if ( counter == 0 )
{
return kGeneralErr;
}
}
}
else
{
/* read transaction */
if ( message->rx_length == 1 )
{
/* disable acknowledgement before we are going to receive a single byte */
I2C_AcknowledgeConfig( i2c_mapping[device->port].i2c, DISABLE );
}
else
{
/* enable acknowledgement before we start receiving multiple bytes */
I2C_AcknowledgeConfig( i2c_mapping[device->port].i2c, ENABLE );
}
/* start dma which will read bytes */
i2c_dma_config_and_execute( device, message, false );
/* wait til the last byte is received */
counter = 1000;
while ( I2C_GetFlagStatus( i2c_mapping[device->port].i2c, I2C_FLAG_BTF ) == RESET )
{
--counter;
if ( counter == 0 )
{
return kGeneralErr;
}
}
}
}
/* generate a stop condition */
I2C_GenerateSTOP( i2c_mapping[device->port].i2c, ENABLE );
return kNoErr;
}
#else
static OSStatus i2c_transfer_message_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message )
{
OSStatus err;
if ( message->tx_buffer != NULL )
{
err = i2c_tx_no_dma( i2c, config, message );
if ( err != kNoErr )
{
goto exit;
}
}
if ( message->rx_buffer != NULL )
{
err = i2c_rx_no_dma( i2c, config, message );
}
exit:
/* generate a stop condition */
I2C_GenerateSTOP( i2c->port, ENABLE );
return err;
}
#endif
OSStatus platform_i2c_init_tx_message( platform_i2c_message_t* message, const void* tx_buffer, uint16_t tx_buffer_length, uint16_t retries )
{
OSStatus err = kNoErr;
require_action_quiet( ( message != NULL ) && ( tx_buffer != NULL ) && ( tx_buffer_length != 0 ), exit, err = kParamErr);
memset(message, 0x00, sizeof(platform_i2c_message_t));
message->tx_buffer = tx_buffer;
message->retries = retries;
message->tx_length = tx_buffer_length;
exit:
return err;
}
OSStatus platform_i2c_init_rx_message( platform_i2c_message_t* message, void* rx_buffer, uint16_t rx_buffer_length, uint16_t retries )
{
OSStatus err = kNoErr;
require_action_quiet( ( message != NULL ) && ( rx_buffer != NULL ) && ( rx_buffer_length != 0 ), exit, err = kParamErr);
memset(message, 0x00, sizeof(platform_i2c_message_t));
message->rx_buffer = rx_buffer;
message->retries = retries;
message->rx_length = rx_buffer_length;
exit:
return err;
}
OSStatus platform_i2c_init_combined_message( platform_i2c_message_t* message, const void* tx_buffer, void* rx_buffer, uint16_t tx_buffer_length, uint16_t rx_buffer_length, uint16_t retries )
{
OSStatus err = kNoErr;
require_action_quiet( ( message != NULL ) && ( tx_buffer != NULL ) && ( tx_buffer_length != 0 ) && ( rx_buffer != NULL ) && ( rx_buffer_length != 0 ), exit, err = kParamErr);
memset(message, 0x00, sizeof(platform_i2c_message_t));
message->rx_buffer = rx_buffer;
message->tx_buffer = tx_buffer;
message->retries = retries;
message->tx_length = tx_buffer_length;
message->rx_length = rx_buffer_length;
exit:
return err;
}
OSStatus platform_i2c_transfer( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* messages, uint16_t number_of_messages )
{
OSStatus err = kNoErr;
int i = 0;
platform_mcu_powersave_disable();
require_action_quiet( i2c != NULL, exit, err = kParamErr);
for( i=0; i < number_of_messages; i++ )
{
#ifdef I2C_USE_DMA
err = i2c_dma_transfer(device, &messages[i]);
require_noerr(err, exit);
#else
err = i2c_transfer_message_no_dma( i2c, config, &messages[ i ] );
require_noerr(err, exit);
#endif
}
exit:
platform_mcu_powersave_enable();
return err;
}
OSStatus platform_i2c_deinit( const platform_i2c_t* i2c, const platform_i2c_config_t* config )
{
UNUSED_PARAMETER( config );
OSStatus err = kNoErr;
platform_mcu_powersave_disable();
require_action_quiet( i2c != NULL, exit, err = kParamErr);
/* Disable I2C peripheral clocks */
RCC_APB1PeriphClockCmd( i2c->peripheral_clock_reg, DISABLE );
/* Disable DMA */
#ifdef I2C_USE_DMA
DMA_DeInit( i2c->rx_dma_stream );
DMA_DeInit( i2c->tx_dma_stream );
RCC_AHB1PeriphClockCmd( i2c->tx_dma_peripheral_clock, DISABLE );
#endif
exit:
platform_mcu_powersave_enable();
return err;
}
static OSStatus i2c_wait_for_event( I2C_TypeDef* i2c, uint32_t event_id, uint32_t number_of_waits )
{
mico_rtos_delay_milliseconds(2);
while ( I2C_CheckEvent( i2c, event_id ) != SUCCESS )
{
number_of_waits--;
if ( number_of_waits == 0 )
{
return kTimeoutErr;
}
}
return kNoErr;
}
static OSStatus i2c_address_device( const platform_i2c_t* i2c, const platform_i2c_config_t* config, int retries, uint8_t direction )
{
OSStatus err = kTimeoutErr;
/* Some chips( authentication and security related chips ) has to be addressed several times before they acknowledge their address */
for ( ; retries != 0 ; --retries )
{
/* Generate a start condition and address a i2c in write mode */
I2C_GenerateSTART( i2c->port, ENABLE );
/* wait till start condition is generated and the bus becomes free */
err = i2c_wait_for_event( i2c->port, I2C_EVENT_MASTER_MODE_SELECT, I2C_FLAG_CHECK_TIMEOUT );
if(err != kNoErr)
continue;
if ( config->address_width == I2C_ADDRESS_WIDTH_7BIT )
{
/* send the address and R/W bit set to write of the requested i2c, wait for an acknowledge */
I2C_Send7bitAddress( i2c->port, (uint8_t) ( config->address << 1 ), direction );
/* wait till address gets sent and the direction bit is sent and */
err = i2c_wait_for_event( i2c->port, (direction == I2C_Direction_Transmitter) ? I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED : I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED, I2C_FLAG_CHECK_LONG_TIMEOUT );
if ( err == kNoErr )
goto exit;
}
/* TODO: Support other address widths */
}
exit:
return err;
}
static OSStatus i2c_tx_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message )
{
OSStatus err = kNoErr;
int i;
/* Send data */
err = i2c_address_device( i2c, config, message->retries, I2C_Direction_Transmitter );
require_noerr(err, exit);
for ( i = 0; i < message->tx_length; i++ )
{
I2C_SendData( i2c->port, ((uint8_t*)message->tx_buffer)[ i ] );
/* wait till it actually gets transferred and acknowledged */
err = i2c_wait_for_event( i2c->port, I2C_EVENT_MASTER_BYTE_TRANSMITTED, I2C_FLAG_CHECK_TIMEOUT );
require_noerr(err, exit);
}
exit:
return err;
}
static OSStatus i2c_rx_no_dma( const platform_i2c_t* i2c, const platform_i2c_config_t* config, platform_i2c_message_t* message )
{
OSStatus err = kNoErr;
int i;
err = i2c_address_device( i2c, config, message->retries, I2C_Direction_Receiver );
require_noerr(err, exit);
/* Disable acknowledgement if this is a single byte transmission */
if ( message->rx_length == 1 )
{
I2C_AcknowledgeConfig( i2c->port, DISABLE );
}
else
{
I2C_AcknowledgeConfig( i2c->port, ENABLE );
}
/* Start reading bytes */
for ( i = 0; i < message->rx_length; i++ )
{
/* wait till something is in the i2c data register */
err = i2c_wait_for_event( i2c->port, I2C_EVENT_MASTER_BYTE_RECEIVED, I2C_FLAG_CHECK_TIMEOUT );
require_noerr(err, exit);
/* get data */
((uint8_t*)message->rx_buffer)[ i ] = I2C_ReceiveData( i2c->port );
/* Check if last byte has been received */
if ( i == ( message->rx_length - 1 ) )
{
}
else /* Check if the second last byte has been received */
if ( i == ( message->rx_length - 2 ) )
{
/* setup NACK for the last byte to be received */
I2C_AcknowledgeConfig( i2c->port, DISABLE );
}
else
{
/* setup an acknowledgement beforehand for every byte that is to be received */
I2C_AcknowledgeConfig( i2c->port, ENABLE );
}
}
exit:
return err;
}
Reference in New Issue View Git Blame Copy Permalink