/*---------------------------------------------------------------------------*
 *          SW Flash/SDRAM Download Configuration Script                     *
 *                                                                           *
 *   Work Mode        : Support different work mode,but OTP+ROM mode work    *
 *                      on FPGA platform only,Flash only mode must select    *
 *                      the VECTRESET reset                                  *
 *                                                                           *
 *   Hardware Platform: Support FPGA test platform or ASIC chip platform     *
 *                                                                           *
 *   Oscillator Select: Select external oscillator,it can speed up the       *
 *                      download,if you cannot be sure,select 'None'         *
 *                                                                           *
 *   Fast Erase       : Merge the multi-sectors erase into block erase,if    *
 *                      signal of board not good,select 'Normal'             *
 *                                                                           *
 *   Lock Range       : Prevent data damage from write protection            *
 *                                                                           *
 *   Debug Port       : Downloader debug interface                           *
 *                                                                           *
 *   Download Offset  : Download the code to flash from the offset address,  *
 *                      the set value must be 4KB aligned!!ŁĄ                *
 *                                                                           *
 *   CRC Option       : Downloader CRC options settings                      *
 *                                                                           *
 *   Protect Address  : Flash protection start address, downloader will not  *
 *                      erase the protected flash area. This value must be   *
 *                      4KB aligned!!ŁĄ                                      *
 *                                                                           *
 *   Protect Size     : Flash protection size, downloader will not erase the *
 *                      protected flash area. This value must be multiple of *
 *                      4KB!!ŁĄ                                              *
 *---------------------------------------------------------------------------*/

FUNC void Setup (void) {
    //Work Mode[0:OTP only,1:OTP+FLASH,2:OTP+SDRAM,3:OTP+ROM,4:FLASH only,5:SDRAM Test]
    _WDWORD(0x20007C00,1);

    //Hardware Platform[0:ASIC platform,1:FPGA platform]
    _WDWORD(0x20007C04,0);

    //Oscillator Select[-1:None,0:32K,1:1M,2:2M,...,31:31M]
    _WDWORD(0x20007C08,0);

    //Fast Erase[0:Nomal,1:Fast]
    _WDWORD(0x20007C0C,0);

    //Lock Range[0:None,1:50%,2:75%,3:87.5%,4:100%]
    _WDWORD(0x20007C10,0);

    //Debug Port[0:none, 1:port 1, 2:port 2, 3:port 0, -1:none]
    _WDWORD(0x20007C14,-1);

    //Download Offset[0:0x00000000,where:0xWHERE, must be 4KB align!!!]
    _WDWORD(0x20007C18,0);

    //CRC Option[0x0000: Normal CRC, 0x43524346: Fast CRC 0x4352434E: No CRC]
    _WDWORD(0x20007C1C,0);

    //Flash Protect Start Address[0:0x00000000,where:0xWHERE, must be 4KB align!!!]
    _WDWORD(0x20007C20,0);

    //Flash Protect Size[0:0x00000000,size:0xSIZE, must be multiple of 4KB!!!]
    _WDWORD(0x20007C24,0);
}

Setup();