修改了Web后台的部分界面，增加了HAmqtt中的总电量传感器，后台新增mqtt上报频率设置

mico-os/makefiles/OpenOCD/mw3xx/mw3xx.cfg

@@ -0,0 +1,125 @@
+source [find mico-os/makefiles/OpenOCD/mw3xx/wmcore.cfg]
+
+### chip_id() -- get chip revision id
+
+proc chip_id { } {
+	# make sure the CPU is stopped and in a known state
+        reset halt
+
+	# Update this array for each unique chip id
+	array set chip_id_array {
+		0x00000001 "mc200"
+		0x88110841 "mc200"
+		0x88130A40 "mw300"
+		0x88130A41 "mw300"
+	}
+
+	# read chip revision id register
+	mem2array chip_id 32 0x480b0000 1
+
+	foreach {chip_id_val chip_name} [array get chip_id_array] {
+		if { $chip_id(0) == $chip_id_val } {
+			echo [format "Chip id 0x%08x detected" $chip_id(0)]
+			puts -nonewline $chip_name
+			return
+		}
+	}
+
+	# chip id not known, print chip id for diagnostics
+	echo [format "Unknown chip id 0x%08x" $chip_id(0)]
+	puts -nonewline "unknown"
+}
+
+### chip_fix() -- do chip specific fixup
+
+proc chip_fixup { } {
+	# read chip revision id register
+	mem2array chip_id 32 0x480b0000 1
+
+	# Fix for mw300
+	if { $chip_id(0) == 0x88130A41 } {
+		# Change system clock source to RC32M
+		mwb 0x480a0018 1
+		# Reset WLAN
+		mwb 0x480a0118 0
+	}
+}
+
+### program_image() -- program flash using openocd flash commands
+#
+# 1. Reset and halt processor in a known state
+# 2. Erase the requested flash region and write $filename data at $offset
+#    in the flash
+
+proc program_image { offset filename } {
+	# make sure the CPU is stopped and in a known state
+        reset halt
+
+	# do chip fixup if any
+	chip_fixup
+
+	# erase the flash region and write file data at the offset
+	flash write_image erase $filename $offset
+}
+
+### load() -- load any generic application axf image to ram and run ###
+#
+# 1. Reset and halt processor in a known state
+# 2. Load axf image into internal ram of target device
+# 3. Verify loaded axf image
+# 4. Pass control to loaded image using its entry point address
+#
+# NOTE: Entry point address of axf image can be found using
+# command: readelf -h <image>
+
+proc load { img entry_point } {
+	# make sure the CPU is stopped and in a known state
+        reset halt
+
+	# do chip fixup if any
+	chip_fixup
+
+        # load the axf image
+        load_image $img
+	# verify the loaded image
+        verify_image $img
+
+        # execute the loaded image
+        resume $entry_point
+}
+
+### sh_load() -- load flashprog.axf (flash tool) image to ram and run ###
+#
+# 1. Reset and halt processor in a known state
+# 2. Enable arm semihosting
+# 3. Load axf image into internal ram of target device
+# 4. Verify loaded axf image
+# 5. Pass control to loaded image using its entry point address
+#
+# NOTE: Entry point address of axf image can be found using
+# command: readelf -h <image>
+
+proc sh_load { img entry_point } {
+	# make sure the CPU is stopped and in a known state
+        reset halt
+ 
+	# do chip fixup if any
+	chip_fixup
+
+        # load the axf image
+        load_image $img
+	# verify the loaded image
+        verify_image $img
+
+        # enable semihosting by default (needed for flashprog)
+        arm semihosting enable
+
+	# attach handler for halt
+	wmcore.cpu configure -event halted {
+		echo "Flashprog Complete"
+		shutdown
+	}
+
+        # execute the loaded image
+	resume $entry_point
+}