修改了Web后台的部分界面，增加了HAmqtt中的总电量传感器，后台新增mqtt上报频率设置

mico-os/makefiles/OpenOCD/lpc5410x/lpc5410x-flash-app.cfg

@@ -0,0 +1,10 @@
+#
+#  UNPUBLISHED PROPRIETARY SOURCE CODE
+#  Copyright (c) 2016 MXCHIP Inc.
+#
+#  The contents of this file may not be disclosed to third parties, copied or
+#  duplicated in any form, in whole or in part, without the prior written
+#  permission of MXCHIP Corporation.
+#
+init
+reset halt

mico-os/makefiles/OpenOCD/lpc5410x/lpc5410x.cfg

@@ -0,0 +1,74 @@
+source [find mico-os/makefiles/OpenOCD/interface/swj-dp.tcl]
+
+adapter_khz 1000
+reset_config srst_only srst_push_pull
+
+set CHIP_FLASH_START 0x00000000
+set CHIP_RAM_START   0x02000000
+
+if { [info exists CHIPNAME] } {
+	set _CHIPNAME $CHIPNAME
+} else {
+	set _CHIPNAME lpc4350
+}
+
+#
+# M4 JTAG mode TAP
+#
+if { [info exists M4_JTAG_TAPID] } {
+	set _M4_JTAG_TAPID $M4_JTAG_TAPID
+} else {
+	set _M4_JTAG_TAPID 0x4ba00477
+}
+
+#
+# M4 SWD mode TAP
+#
+if { [info exists M4_SWD_TAPID] } {
+	set _M4_SWD_TAPID $M4_SWD_TAPID
+} else {
+	set _M4_SWD_TAPID 0x2ba01477
+}
+
+if { [using_jtag] } {
+	set _M4_TAPID $_M4_JTAG_TAPID
+} {
+	set _M4_TAPID $_M4_SWD_TAPID
+}
+
+#
+# M0 TAP
+#
+if { [info exists M0_JTAG_TAPID] } {
+	set _M0_JTAG_TAPID $M0_JTAG_TAPID
+} else {
+	set _M0_JTAG_TAPID 0x0ba01477
+}
+
+swj_newdap $_CHIPNAME m4 -irlen 4 -ircapture 0x1 -irmask 0xf \
+				-expected-id $_M4_TAPID
+				
+set _TARGETNAME $_CHIPNAME.m4				
+target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.m4
+
+if { [using_jtag] } {
+	swj_newdap $_CHIPNAME m0 -irlen 4 -ircapture 0x1 -irmask 0xf \
+				-expected-id $_M0_JTAG_TAPID
+	target create $_CHIPNAME.m0 cortex_m -chain-position $_CHIPNAME.m0
+}
+
+if {![using_hla]} {
+   # on this CPU we should use VECTRESET to perform a soft reset and
+   # manually reset the periphery
+   # SRST or SYSRESETREQ disable the debug interface for the time of
+   # the reset and will not fit our requirements for a consistent debug
+   # session
+   cortex_m reset_config vectreset
+}
+
+#Reset target when gdb attaches
+$_TARGETNAME configure -event gdb-attach { reset halt; sleep 1; mww 0xE0042004 3; mww 0xE0042008 0xffffffff }
+
+#shutdown OpenOCD daemon when gdb detaches
+$_TARGETNAME configure -event gdb-detach { mww 0xE0042008 0x00000000; reset halt; sleep 5; resume; shutdown }
+

mico-os/makefiles/OpenOCD/lpc5410x/lpc5410x_gdb_jtag.cfg

@@ -0,0 +1,14 @@
+#
+#  UNPUBLISHED PROPRIETARY SOURCE CODE
+#  Copyright (c) 2016 MXCHIP Inc.
+#
+#  The contents of this file may not be disclosed to third parties, copied or
+#  duplicated in any form, in whole or in part, without the prior written
+#  permission of MXCHIP Corporation.
+#
+# default ports
+telnet_port 4444
+gdb_port 3333
+gdb_memory_map enable
+
+init