mirror of
https://github.com/oopuuu/zTC1.git
synced 2025-12-19 16:33:20 +08:00
修复mico-sdk错误
This commit is contained in:
nhkefus
@@ -1,149 +1,149 @@
|
||||
/**
|
||||
*****************************************************************************
|
||||
* @file sdio.h
|
||||
* @author Richard
|
||||
* @version V1.0.0
|
||||
* @date 27-June-2013
|
||||
* @brief declare sdio controller driver interface
|
||||
* @note For sdio and spi can't access memory simultaneously
|
||||
*****************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2013 MVSilicon </center></h2>
|
||||
*/
|
||||
|
||||
#ifndef __SDIO_H__
|
||||
#define __SDIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif//__cplusplus
|
||||
|
||||
#define NO_ERR (0)
|
||||
#define SEND_CMD_TIME_OUT_ERR (1)
|
||||
|
||||
|
||||
/**
|
||||
* @brief enable sd card clk,output 0~24M
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioEnableClk(void);
|
||||
|
||||
/**
|
||||
* @brief disable sd card clk,output 1
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDisableClk(void);
|
||||
|
||||
/**
|
||||
* @brief div sd card clk, four bits,0 is 2 div,max div val is 0xB(4096 div)
|
||||
* @param ClkIndex [2,4096]
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioSetClk(uint32_t ClkIndex);
|
||||
|
||||
/**
|
||||
* @brief data transfer end
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioEndDatTrans(void);
|
||||
|
||||
/**
|
||||
* @brief check data transfer done
|
||||
* @param NONE
|
||||
* @return bool 1 means done
|
||||
*/
|
||||
bool SdioIsDatTransDone(void);
|
||||
|
||||
/**
|
||||
* @brief get sdio card current transfer status
|
||||
* @param NONE
|
||||
* @return sdio card current transfer status
|
||||
*/
|
||||
uint8_t SdioGetStatus(void);
|
||||
|
||||
/**
|
||||
* @brief get sdio card response status
|
||||
* @param NONE
|
||||
* @return current sd card status
|
||||
*/
|
||||
uint8_t SdioGetResponseStatus(void);
|
||||
|
||||
/**
|
||||
* @brief check card is busy
|
||||
* @param NONE
|
||||
* @return 0 is busy, 1 is idle
|
||||
*/
|
||||
bool SdioIsBusy(void);
|
||||
|
||||
/**
|
||||
* @brief Start receive data, after receiving, controller auto stops the clock.
|
||||
* @param InBuf save data in this buffer
|
||||
* @param DataLen recive data length,max not exceed 512 BYTES
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioStartReciveData(uint8_t* InBuf, uint16_t DataLen);
|
||||
|
||||
/**
|
||||
* @brief Start send data
|
||||
* @param OutBuf send data from this buffer
|
||||
* @param DataLen send data length,max not exceed 512 BYTES
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioStartSendData(uint8_t* OutBuf, uint16_t DataLen);
|
||||
|
||||
/**
|
||||
* @brief Sdio Controller Init
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioControllerInit(void);
|
||||
|
||||
/**
|
||||
* @brief Send basic command.
|
||||
* @param Cmd the command index will send
|
||||
* @param Param the argument of this command
|
||||
* @param TimeOut send cmd time out
|
||||
* @return SEND_CMD_TIME_OUT_ERR-send cmd time out,but maybe this cmd has no response,it's also return FALSE
|
||||
*/
|
||||
bool SdioSendCommand(uint8_t Cmd, uint32_t Param, uint16_t TimeOut);
|
||||
|
||||
/**
|
||||
* @brief enable sd int, it includes and data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptEn(void);
|
||||
|
||||
/**
|
||||
* @brief disable sd int, it includes data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptDis(void);
|
||||
|
||||
/**
|
||||
* @brief clear sd int, it includes data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptClear(void);
|
||||
|
||||
/**
|
||||
* @brief get command response
|
||||
* @param RespBuf save the response
|
||||
* @param RespBufLen the length of the response,
|
||||
* @return NONE
|
||||
* @note totally have 8 response type, all response code length are 48bits except R2(136bits)
|
||||
* so generally RespBufLen can set 5 or 16,more detail please see specification
|
||||
*/
|
||||
void SdioGetCmdResp(uint8_t *RespBuf, uint8_t RespBufLen);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif//__cplusplus
|
||||
|
||||
#endif //__SDIO_H__
|
||||
/**
|
||||
*****************************************************************************
|
||||
* @file sdio.h
|
||||
* @author Richard
|
||||
* @version V1.0.0
|
||||
* @date 27-June-2013
|
||||
* @brief declare sdio controller driver interface
|
||||
* @note For sdio and spi can't access memory simultaneously
|
||||
*****************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© COPYRIGHT 2013 MVSilicon </center></h2>
|
||||
*/
|
||||
|
||||
#ifndef __SDIO_H__
|
||||
#define __SDIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif//__cplusplus
|
||||
|
||||
#define NO_ERR (0)
|
||||
#define SEND_CMD_TIME_OUT_ERR (1)
|
||||
|
||||
|
||||
/**
|
||||
* @brief enable sd card clk,output 0~24M
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioEnableClk(void);
|
||||
|
||||
/**
|
||||
* @brief disable sd card clk,output 1
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDisableClk(void);
|
||||
|
||||
/**
|
||||
* @brief div sd card clk, four bits,0 is 2 div,max div val is 0xB(4096 div)
|
||||
* @param ClkIndex [2,4096]
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioSetClk(uint32_t ClkIndex);
|
||||
|
||||
/**
|
||||
* @brief data transfer end
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioEndDatTrans(void);
|
||||
|
||||
/**
|
||||
* @brief check data transfer done
|
||||
* @param NONE
|
||||
* @return bool 1 means done
|
||||
*/
|
||||
bool SdioIsDatTransDone(void);
|
||||
|
||||
/**
|
||||
* @brief get sdio card current transfer status
|
||||
* @param NONE
|
||||
* @return sdio card current transfer status
|
||||
*/
|
||||
uint8_t SdioGetStatus(void);
|
||||
|
||||
/**
|
||||
* @brief get sdio card response status
|
||||
* @param NONE
|
||||
* @return current sd card status
|
||||
*/
|
||||
uint8_t SdioGetResponseStatus(void);
|
||||
|
||||
/**
|
||||
* @brief check card is busy
|
||||
* @param NONE
|
||||
* @return 0 is busy, 1 is idle
|
||||
*/
|
||||
bool SdioIsBusy(void);
|
||||
|
||||
/**
|
||||
* @brief Start receive data, after receiving, controller auto stops the clock.
|
||||
* @param InBuf save data in this buffer
|
||||
* @param DataLen recive data length,max not exceed 512 BYTES
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioStartReciveData(uint8_t* InBuf, uint16_t DataLen);
|
||||
|
||||
/**
|
||||
* @brief Start send data
|
||||
* @param OutBuf send data from this buffer
|
||||
* @param DataLen send data length,max not exceed 512 BYTES
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioStartSendData(uint8_t* OutBuf, uint16_t DataLen);
|
||||
|
||||
/**
|
||||
* @brief Sdio Controller Init
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioControllerInit(void);
|
||||
|
||||
/**
|
||||
* @brief Send basic command.
|
||||
* @param Cmd the command index will send
|
||||
* @param Param the argument of this command
|
||||
* @param TimeOut send cmd time out
|
||||
* @return SEND_CMD_TIME_OUT_ERR-send cmd time out,but maybe this cmd has no response,it's also return FALSE
|
||||
*/
|
||||
bool SdioSendCommand(uint8_t Cmd, uint32_t Param, uint16_t TimeOut);
|
||||
|
||||
/**
|
||||
* @brief enable sd int, it includes and data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptEn(void);
|
||||
|
||||
/**
|
||||
* @brief disable sd int, it includes data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptDis(void);
|
||||
|
||||
/**
|
||||
* @brief clear sd int, it includes data int
|
||||
* @param NONE
|
||||
* @return NONE
|
||||
*/
|
||||
void SdioDataInterruptClear(void);
|
||||
|
||||
/**
|
||||
* @brief get command response
|
||||
* @param RespBuf save the response
|
||||
* @param RespBufLen the length of the response,
|
||||
* @return NONE
|
||||
* @note totally have 8 response type, all response code length are 48bits except R2(136bits)
|
||||
* so generally RespBufLen can set 5 or 16,more detail please see specification
|
||||
*/
|
||||
void SdioGetCmdResp(uint8_t *RespBuf, uint8_t RespBufLen);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif//__cplusplus
|
||||
|
||||
#endif //__SDIO_H__
|
||||
|
||||
Reference in New Issue
Block a user