mirror of
https://github.com/fsender/readguy.git
synced 2026-04-26 19:29:40 +08:00
421 lines
15 KiB
C++
421 lines
15 KiB
C++
/******************** F r i e n d s h i p E n d e r ********************
|
||
* 本程序隶属于 Readguy 开源项目, 请尊重开源开发者, 也就是我FriendshipEnder.
|
||
* 如果有条件请到 extra/artset/reward 中扫描打赏,否则请在 Bilibili 上支持我.
|
||
* 项目交流QQ群: 926824162 (萌新可以进来问问题的哟)
|
||
* 郑重声明: 未经授权还请不要商用本开源项目编译出的程序.
|
||
* @file guy_583A.cpp
|
||
* @author FriendshipEnder (f_ender@163.com), Bilibili: FriendshipEnder
|
||
* @brief 墨水屏 驱动库函数 源代码模板
|
||
* 使用前, 先查找替换 583A 改为你需要的驱动名称
|
||
* 比如3英寸的屏幕驱动程序应该叫 guy_dev_300a
|
||
* 此时需要将 583A 替换为300A.
|
||
* 替换好之后, 改文件名, 大小写也要注意改 (文件名最好不要出现大写)
|
||
* 最后把这个brief替换掉
|
||
* @version 1.0
|
||
* @date 2023-11-11
|
||
|
||
* @attention
|
||
* Copyright (c) 2022-2023 FriendshipEnder
|
||
*
|
||
* Apache License, Version 2.0
|
||
*
|
||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||
* you may not use this file except in compliance with the License.
|
||
* You may obtain a copy of the License at
|
||
*
|
||
* http://www.apache.org/licenses/LICENSE-2.0
|
||
*
|
||
* Unless required by applicable law or agreed to in writing, software
|
||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
* See the License for the specific language governing permissions and
|
||
* limitations under the License.
|
||
*/
|
||
#include <stdlib.h>
|
||
#include "guy_583A.h"
|
||
#ifdef READGUY_DEV_583A
|
||
namespace guydev_583A{
|
||
/*LUT格式：
|
||
重复次数，xnnnxnnn...(000=0,001=VSH,010=VSL,011=VSH_LV,100=VSL_LV,101=VSH_LVX,110=VSL_LVX,111=浮动),持续时间.......
|
||
0x01, 0x00, 0x00, 0x1B, 0x10, 0x0F, 0x0A, 0x0A, 0x0F, 0x10, 0x1B
|
||
0x01, 0x00, 0x00, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
0x01, 0x21, 0x21, 0x21, 0x21, 0x1B, 0x10, 0x0F, 0x0A, 0x0A, 0x0F, 0x10, 0x1B
|
||
0x01, 0x12, 0x12, 0x12, 0x10, 0x14, 0x01, 0x02, 0x01, 0x02, 0x01, 0x02, 0x00
|
||
0x01, 0x11, 0x21, 0x21, 0x22, 0x1B, 0x10, 0x0F, 0x0A, 0x0A, 0x0F, 0x10, 0x1B
|
||
0x01, 0x21, 0x21, 0x21, 0x20, 0x14, 0x01, 0x04, 0x01, 0x04, 0x01, 0x04, 0x00
|
||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
0x01, 0x12, 0x12, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02
|
||
0x01, 0x21, 0x21, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02
|
||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||
*/
|
||
const PROGMEM unsigned char drv::lut_20_LUTC[] =
|
||
{ 0x01, 0x00, 0x00, 0x1B, 0x10, 0x0F, 0x0A, 0x0A, 0x0F, 0x10, 0x1B};
|
||
const PROGMEM unsigned char drv::lut_20_LUTCFAST[] =
|
||
{ 0x01, 0x00, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::lut_21_LUTB[] =//000
|
||
{ 0x01, 0x21, 0x21, 0x21, 0x21, 0x1B, 0x14, 0x13, 0x12, 0x00, 0x00, 0x10, 0x1E};
|
||
const PROGMEM unsigned char drv::lut_21_LUTBFAST[] =
|
||
{ 0x01, 0x12, 0x12, 0x12, 0x10, 0x1f, 0x01, 0x02, 0x01, 0x02, 0x01, 0x02, 0x00};
|
||
const PROGMEM unsigned char drv::lut_22_LUTW[] =//011
|
||
{ 0x01, 0x11, 0x21, 0x21, 0x22, 0x1B, 0x14, 0x13, 0x12, 0x00, 0x00, 0x10, 0x1E};
|
||
const PROGMEM unsigned char drv::lut_22_LUTWFAST[] =
|
||
{ 0x01, 0x21, 0x21, 0x21, 0x20, 0x1f, 0x01, 0x04, 0x01, 0x04, 0x01, 0x04, 0x00};
|
||
const PROGMEM unsigned char drv::lut_23_LUTG1[] =//001
|
||
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::lut_24_LUTG2[] =//010
|
||
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::lut_25_LUTR0[] =//100//WW
|
||
{ 0x01, 0x12, 0x12, 0x02, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03};
|
||
const PROGMEM unsigned char drv::lut_26_LUTR1[] =//101//BB
|
||
{ 0x00/*0x01*/, 0x21, 0x21, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02};
|
||
const PROGMEM unsigned char drv::lut_27_LUTR2[] =//110
|
||
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::lut_28_LUTR3[] =//111//局刷
|
||
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::lut_29_LUTXON[] =
|
||
{ 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
||
const PROGMEM unsigned char drv::customGrey[] =
|
||
{ 0x00, 0x01, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x0a, 0x0c, 0x0e, 0x11, 0x14, 0x17, 0x1a, 0x1e,
|
||
0x00, 0x0f, 0x0e, 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, 0x01};
|
||
const PROGMEM unsigned char *drv::luts[10]={
|
||
lut_20_LUTC,lut_21_LUTB,lut_22_LUTW,lut_23_LUTG1,lut_24_LUTG2,
|
||
lut_25_LUTR0,lut_26_LUTR1,lut_27_LUTR2,lut_28_LUTR3,lut_29_LUTXON
|
||
};
|
||
const unsigned char *drv::luts_fast[10]={
|
||
lut_20_LUTCFAST,lut_21_LUTBFAST,lut_22_LUTWFAST,lut_23_LUTG1,lut_24_LUTG2,
|
||
lut_25_LUTR0,lut_26_LUTR1,lut_27_LUTR2,lut_28_LUTR3,lut_29_LUTXON
|
||
};
|
||
|
||
#ifdef READGUY_583A_DUAL_BUFFER
|
||
drv::drv(){ //构造时, 分配内存.
|
||
buf_2nd=(uint8_t *)malloc(GUY_D_WIDTH*GUY_D_HEIGHT/8);
|
||
if(buf_2nd) {
|
||
Serial.println(F("[GUY MEM] allocate 33600B for 5.83' EPD."));
|
||
//memset(buf_2nd,0,GUY_D_WIDTH*GUY_D_HEIGHT/8);
|
||
}
|
||
}
|
||
drv::~drv(){ //构造时, 分配内存.
|
||
if(buf_2nd) free(buf_2nd);
|
||
Serial.println(F("[GUY MEM] unallocate 33600B."));
|
||
}
|
||
#endif
|
||
void drv::sendLut(int lutid){
|
||
int lutlen=13,lutlen2=247;
|
||
if(lutid==0){lutlen=11;lutlen2=209;}
|
||
else if(lutid==9){lutlen=10;lutlen2=190;}
|
||
guy_epdCmd(0x20+lutid);
|
||
if(epdFull){
|
||
for(int i=0;i<lutlen;i++){
|
||
guy_epdParam(pgm_read_byte(luts[lutid]+i));
|
||
}
|
||
}
|
||
else{
|
||
for(int i=0;i<lutlen;i++){
|
||
if(lutid==1 && i==5) guy_epdParam(pgm_read_byte(customGrey+iLut+greyscalingHighQuality));
|
||
else
|
||
guy_epdParam(pgm_read_byte(luts_fast[lutid]+i));
|
||
}
|
||
}
|
||
for(int i=0;i<lutlen2;i++){
|
||
guy_epdParam(0);
|
||
}
|
||
}
|
||
void drv::epd_init(){
|
||
if(!epd_PowerOn) Reset(); //设定为已上电
|
||
guy_epdCmd(0x01);
|
||
guy_epdParam(0x37);
|
||
guy_epdParam(0x00);
|
||
guy_epdParam(0x07);
|
||
guy_epdParam(0x07);
|
||
guy_epdCmd(0x00);
|
||
guy_epdParam(0xcf);
|
||
guy_epdParam(0x88);
|
||
guy_epdCmd(0x06);
|
||
guy_epdParam(0xc7);
|
||
guy_epdParam(0xcc);
|
||
guy_epdParam(0x28);
|
||
guy_epdCmd(0x30);
|
||
guy_epdParam(0x3a);
|
||
guy_epdCmd(0x41);
|
||
guy_epdParam(0x00);
|
||
guy_epdCmd(0x50);
|
||
guy_epdParam(0x77);
|
||
guy_epdCmd(0x60);
|
||
guy_epdParam(0x22);
|
||
guy_epdCmd(0x61);
|
||
guy_epdParam(0x02);
|
||
guy_epdParam(0x58);
|
||
guy_epdParam(0x01);
|
||
guy_epdParam(0xc0);
|
||
guy_epdCmd(0x82);
|
||
guy_epdParam(0x28);
|
||
for(int i=0;i<10;i++){
|
||
sendLut(i);
|
||
}
|
||
guy_epdCmd(0xe5);
|
||
guy_epdParam(0x03);
|
||
}
|
||
void drv::epd_sendZoneInfo(){
|
||
guy_epdCmd(0x91);
|
||
//send area info
|
||
guy_epdCmd(0x90);
|
||
guy_epdParam(0x00);
|
||
guy_epdParam(0x00);
|
||
guy_epdParam(0x02);
|
||
guy_epdParam(0x57);
|
||
guy_epdParam(0x00);
|
||
guy_epdParam(0x00);
|
||
guy_epdParam(0x01);
|
||
guy_epdParam(0xbf);
|
||
guy_epdParam(0x01);
|
||
}
|
||
void drv::epd_sendWriter(std::function<uint8_t(int)> f){
|
||
guy_epdCmd(0x10); //Then write image data 显示数据
|
||
#ifdef READGUY_583A_DUAL_BUFFER
|
||
if(epdFull || buf_2nd==nullptr || greyscalingHighQuality){
|
||
#endif
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/8;i++){ //fill 0x03 for test
|
||
uint8_t dat=0,dat_r=f(i);
|
||
dat |= ((dat_r&0x80)?0x30:0);
|
||
dat |= ((dat_r&0x40)?0x03:0);
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x20)?0x30:0);
|
||
dat |= ((dat_r&0x10)?0x03:0);
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x08)?0x30:0);
|
||
dat |= ((dat_r&0x04)?0x03:0);
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x02)?0x30:0);
|
||
dat |= ((dat_r&0x01)?0x03:0);
|
||
guy_epdParam(dat);
|
||
#ifdef READGUY_583A_DUAL_BUFFER
|
||
buf_2nd[i]=dat_r;
|
||
}
|
||
}
|
||
else{
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/8;i++){ //fill 0x03 for test
|
||
//guy_epdParam(0x03); //for data test
|
||
uint8_t dat=0,dat_r=f(i);
|
||
dat |= ((dat_r&0x80)?((buf_2nd[i]&0x80)?0x40:0x30):((buf_2nd[i]&0x80)?0x00:0x50));
|
||
//0x3?黑->白色, 0x0?白->黑色 0x4? 白->白色 0x5? 黑->黑色
|
||
dat |= ((dat_r&0x40)?((buf_2nd[i]&0x40)?0x4:0x3):((buf_2nd[i]&0x40)?0x0:0x5));
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x20)?((buf_2nd[i]&0x20)?0x40:0x30):((buf_2nd[i]&0x20)?0x00:0x50));
|
||
dat |= ((dat_r&0x10)?((buf_2nd[i]&0x10)?0x4:0x3):((buf_2nd[i]&0x10)?0x0:0x5));
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x8)?((buf_2nd[i]&0x8)?0x40:0x30):((buf_2nd[i]&0x8)?0x00:0x50));
|
||
dat |= ((dat_r&0x4)?((buf_2nd[i]&0x4)?0x4:0x3):((buf_2nd[i]&0x4)?0x0:0x5));
|
||
guy_epdParam(dat);
|
||
dat&=0;
|
||
dat |= ((dat_r&0x2)?((buf_2nd[i]&0x2)?0x40:0x30):((buf_2nd[i]&0x2)?0x00:0x50));
|
||
dat |= ((dat_r&0x1)?((buf_2nd[i]&0x1)?0x4:0x3):((buf_2nd[i]&0x1)?0x0:0x5));
|
||
guy_epdParam(dat);
|
||
buf_2nd[i]=dat_r;
|
||
}
|
||
#endif
|
||
}
|
||
}
|
||
void drv::drv_init(){ //初始化屏幕
|
||
epdFull=1;
|
||
epd_PowerOn=0;
|
||
}
|
||
void drv::drv_fullpart(bool part){ //初始化慢刷/快刷功能
|
||
if(lastRefresh) return;
|
||
if(!epd_PowerOn) part=0;
|
||
epdFull=!part;
|
||
if(epdFull) iLut=15;
|
||
}
|
||
void drv::drv_setDepth(uint8_t i){
|
||
if(!epd_PowerOn) return; //不支持切换到快刷的情形
|
||
epdFull=0; iLut = i?(i>15?15:i):15; //如果需要, 改成自己的代码
|
||
}
|
||
void drv::drv_dispWriter(std::function<uint8_t(int)> f,uint8_t m){ //单色刷新
|
||
if(m&1){//stage 1
|
||
if(lastRefresh) drv_dispWriter(f,2);
|
||
//add driver code...
|
||
BeginTransfer();
|
||
if(epdFull){
|
||
if(!epd_PowerOn){
|
||
epdFull=0; //发送快刷的lut
|
||
epd_init();
|
||
epdFull=1; //发送快刷的lut
|
||
guy_epdCmd(0x04); //power on
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
guy_epdCmd(0x10);
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x33
|
||
guy_epdParam(0x33);
|
||
}
|
||
epd_PowerOn=1; //设定为已上电
|
||
}
|
||
else{ //full refresh need power on
|
||
guy_epdCmd(0x04); //power on
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
}
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test
|
||
}
|
||
guy_epdCmd(0x92);
|
||
epd_init();
|
||
//epd_init(); //repeat call in GxEPD2
|
||
epd_sendWriter(f); //write image data
|
||
}
|
||
else{
|
||
epd_init();
|
||
//Power on fx
|
||
guy_epdCmd(0x04);
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
epd_sendZoneInfo();
|
||
epd_sendWriter(f);
|
||
guy_epdCmd(0x92);
|
||
epd_sendZoneInfo();
|
||
}
|
||
guy_epdCmd(0x12); //开始刷屏
|
||
EndTransfer();
|
||
lastRefresh=millis();
|
||
}
|
||
if(m&2){//stage 2
|
||
int ms=millis()-lastRefresh;
|
||
Serial.printf("epdFull? %d, epd_PowerOn? %d \n",epdFull,epd_PowerOn);
|
||
int u=epdFull?slowRefTime:fastRefTime; //全刷:局刷 busy时间
|
||
if(ms<u) guy_epdBusy(ms-u); //对于busy电平为低电平忙碌,高电平正常的屏幕则改为ms-u
|
||
lastRefresh=0;
|
||
//add driver code...
|
||
BeginTransfer();
|
||
if(epdFull){
|
||
epdFull=0; //发送快刷的lut
|
||
epd_init(); //repeat init in part mode
|
||
epdFull=1; //发送快刷的lut
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test
|
||
}
|
||
guy_epdCmd(0x02); //power off for test...
|
||
//guy_epdBusy(-30);
|
||
}
|
||
else{
|
||
guy_epdCmd(0x92);
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data 显示数据
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test:全白
|
||
}
|
||
guy_epdCmd(0x92);
|
||
}
|
||
EndTransfer();
|
||
}
|
||
/* test code , with stageless ------------------------------------------------------
|
||
if(epdFull){ //慢刷
|
||
BeginTransfer();
|
||
if(!epd_PowerOn){
|
||
epdFull=0; //发送快刷的lut
|
||
epd_init();
|
||
epdFull=1; //发送快刷的lut
|
||
guy_epdCmd(0x04); //power on
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
guy_epdCmd(0x10);
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x33
|
||
guy_epdParam(0x33);
|
||
}
|
||
epd_PowerOn=1; //设定为已上电
|
||
}
|
||
else{ //full refresh need power on
|
||
guy_epdCmd(0x04); //power on
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
}
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test
|
||
}
|
||
guy_epdCmd(0x92);
|
||
epd_init();
|
||
//epd_init(); //repeat call in GxEPD2
|
||
epd_sendWriter(f); //write image data
|
||
guy_epdCmd(0x12);
|
||
EndTransfer();
|
||
guy_epdBusy(-4000);
|
||
BeginTransfer();
|
||
epdFull=0; //发送快刷的lut
|
||
epd_init(); //repeat init in part mode
|
||
epdFull=1; //发送快刷的lut
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test
|
||
}
|
||
guy_epdCmd(0x02); //power off for test...
|
||
EndTransfer();
|
||
//guy_epdBusy(-30);
|
||
}
|
||
else{ //partmode
|
||
BeginTransfer();
|
||
epd_init();
|
||
//Power on fx
|
||
guy_epdCmd(0x04);
|
||
EndTransfer();
|
||
guy_epdBusy(-60);
|
||
BeginTransfer();
|
||
epd_sendZoneInfo();
|
||
epd_sendWriter(f);
|
||
guy_epdCmd(0x92);
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x12); //快刷
|
||
EndTransfer();
|
||
guy_epdBusy(-1000); //1秒钟刷屏时间
|
||
BeginTransfer();
|
||
guy_epdCmd(0x92);
|
||
epd_sendZoneInfo();
|
||
guy_epdCmd(0x10); //Then write image data 显示数据
|
||
for(int i=0;i<GUY_D_WIDTH*GUY_D_HEIGHT/2;i++){ //fill 0x03 for test
|
||
guy_epdParam(0x33); //for test:全白
|
||
}
|
||
guy_epdCmd(0x92);
|
||
EndTransfer();
|
||
}
|
||
// test code , with stageless ------------------------------------------------------ */
|
||
}
|
||
void drv::drv_draw16grey_step(std::function<uint8_t(int)> f, int step){
|
||
if(_quality&1) return readguyEpdBase::drv_draw16grey_step(f,step);
|
||
if(step==1) drv_fullpart(1);//初始阶段,完成准备工作 //设置为快刷模式
|
||
greyscalingHighQuality=16; //开启高品质灰度模式
|
||
iLut=step;
|
||
drv_dispWriter(f);
|
||
//DelayMs(10); //未知原因()
|
||
if(step==15) greyscalingHighQuality=0;//初始阶段,完成准备工作 //设置为快刷模式
|
||
}
|
||
void drv::drv_sleep() { //开始屏幕睡眠
|
||
if(RST_PIN>=0){ //RST_PIN<0 无法唤醒
|
||
//add driver code...
|
||
guy_epdCmd(0x07); // deep sleep
|
||
guy_epdParam(0xA5); // check code
|
||
}
|
||
epd_PowerOn = 0;
|
||
epdFull = 1; //强制设置为慢刷新模式
|
||
}
|
||
}
|
||
#endif /* END OF FILE. ReadGuy project.
|
||
Copyright (C) 2023 FriendshipEnder. */
|
||
|
||
|