GitHub/jcalendar
1
0
Fork 0
mirror of https://github.com/JADE-Jerry/jcalendar.git synced 2025-12-13 12:58:12 +08:00
Code Issues Packages Projects Releases Wiki Activity

1.1.3

Browse Source
This commit is contained in:
Jerry
2025-10-03 11:04:55 +08:00
parent d085750073
commit 0865a9492a
3 changed files with 36 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files

73
src/main.cpp
View File

@@ -329,71 +329,62 @@ void buttonLongPressStop(void* oneButton) {
#define TIMEOUT_TO_SLEEP 10 // seconds
time_t blankTime = 0;
void go_sleep() {
// 设置唤醒时间为下个偶数整点。
time_t now = time(NULL);
struct tm tmNow = { 0 };
// Serial.printf("Now: %ld -- %s\n", now, ctime(&now));
localtime_r(&now, &tmNow); // 时间戳转化为本地时间结构
uint64_t p;
// 根据配置情况来刷新，如果未配置qweather信息，则24小时刷新，否则每2小时刷新
Preferences pref;
pref.begin(PREF_NAMESPACE);
String _qweather_key = pref.getString(PREF_QWEATHER_KEY, "");
pref.end();
time_t now;
time(&now);
struct tm local;
localtime_r(&now, &local);
if (_qweather_key.length() == 0 || weather_type() == 0) { // 没有配置天气或者使用按日天气，则第二天刷新。
Serial.println("Sleep to next day.");
now += 3600 * 24;
localtime_r(&now, &tmNow); // 将新时间转成tm
// Serial.printf("Set1: %ld -- %s\n", now, ctime(&now));
struct tm tmNew = { 0 };
tmNew.tm_year = tmNow.tm_year;
tmNew.tm_mon = tmNow.tm_mon; // 月份从0开始
tmNew.tm_mday = tmNow.tm_mday; // 日期
tmNew.tm_hour = 0; // 小时
tmNew.tm_min = 0; // 分钟
tmNew.tm_sec = 10; // 秒, 防止离线时出现时间误差，所以，延后10s
time_t set = mktime(&tmNew);
p = (uint64_t)(set - time(NULL));
} else {
if (tmNow.tm_hour % 2 == 0) { // 将时间推后两个小时，偶整点刷新。
now += 7200;
} else {
now += 3600;
// Sleep to next day
int secondsToNextDay = (24 - local.tm_hour) * 3600 - local.tm_min * 60 - local.tm_sec;
if (secondsToNextDay <= 0) {
secondsToNextDay += 24 * 3600;
}
localtime_r(&now, &tmNow); // 将新时间转成tm
// Serial.printf("Set1: %ld -- %s\n", now, ctime(&now));
struct tm tmNew = { 0 };
tmNew.tm_year = tmNow.tm_year;
tmNew.tm_mon = tmNow.tm_mon; // 月份从0开始
tmNew.tm_mday = tmNow.tm_mday; // 日期
tmNew.tm_hour = tmNow.tm_hour; // 小时
tmNew.tm_min = 0; // 分钟
tmNew.tm_sec = 10; // 秒, 防止离线时出现时间误差，所以，延后10s
time_t set = mktime(&tmNew);
p = (uint64_t)(set - time(NULL));
Serial.printf("Seconds to next day: %d seconds.\n", secondsToNextDay);
p = (uint64_t)(secondsToNextDay);
} else {
// Sleep to next even hour.
int secondsToNextHour = (60 - local.tm_min) * 60 - local.tm_sec;
if (secondsToNextHour <= 0) {
secondsToNextHour += 3600;
}
if ((local.tm_hour % 2) == 0) { // 如果是奇数点，则多睡1小时
secondsToNextHour += 3600;
}
Serial.printf("Seconds to next even hour: %d seconds.\n", secondsToNextHour);
p = (uint64_t)(secondsToNextHour);
}
Serial.printf("Sleep time: %ld seconds\n", p);
p += 10; // 额外增加10秒，避免过早唤醒
esp_sleep_enable_timer_wakeup(p * (uint64_t)uS_TO_S_FACTOR);
esp_sleep_enable_ext0_wakeup(KEY_M, LOW);
// 省电考虑，关闭RTC外设和存储器
// esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF); // RTC IO, sensors and ULP, 注意：由于需要按键唤醒，所以不能关闭，否则会导致RTC_IO唤醒失败
// esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_OFF); // RTC IO, sensors and ULP, 注意：由于需要按键唤醒，所以不能关闭，否则会导致RTC_IO唤醒(ext0)失败
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_SLOW_MEM, ESP_PD_OPTION_OFF); //
esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_FAST_MEM, ESP_PD_OPTION_OFF);
esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_OFF);
gpio_deep_sleep_hold_dis(); // 解除所有引脚的保持状态
// 省电考虑，重置gpio，平均每针脚能省8ua。
gpio_reset_pin(PIN_LED_R); // 减小deep-sleep电流
gpio_reset_pin(SPI_CS); // 减小deep-sleep电流
gpio_reset_pin(SPI_DC); // 减小deep-sleep电流
gpio_reset_pin(SPI_RST); // 减小deep-sleep电流
gpio_reset_pin(SPI_BUSY); // 减小deep-sleep电流
gpio_reset_pin(SPI_MOSI); // 减小deep-sleep电流
gpio_reset_pin(SPI_MISO); // 减小deep-sleep电流
gpio_reset_pin(SPI_SCK); // 减小deep-sleep电流
gpio_reset_pin(PIN_ADC); // 减小deep-sleep电流
gpio_reset_pin(I2C_SDA); // 减小deep-sleep电流
gpio_reset_pin(I2C_SCL); // 减小deep-sleep电流
delay(10);
Serial.println("Deep sleep...");