epd42/components/drivers_nrf/ble_flash/ble_flash.h

/**
 * Copyright (c) 2012 - 2017, Nordic Semiconductor ASA
 * 
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 * 
 * 1. Redistributions of source code must retain the above copyright notice, this
 *    list of conditions and the following disclaimer.
 * 
 * 2. Redistributions in binary form, except as embedded into a Nordic
 *    Semiconductor ASA integrated circuit in a product or a software update for
 *    such product, must reproduce the above copyright notice, this list of
 *    conditions and the following disclaimer in the documentation and/or other
 *    materials provided with the distribution.
 * 
 * 3. Neither the name of Nordic Semiconductor ASA nor the names of its
 *    contributors may be used to endorse or promote products derived from this
 *    software without specific prior written permission.
 * 
 * 4. This software, with or without modification, must only be used with a
 *    Nordic Semiconductor ASA integrated circuit.
 * 
 * 5. Any software provided in binary form under this license must not be reverse
 *    engineered, decompiled, modified and/or disassembled.
 * 
 * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * 
 */

/** @file
 *
 * @defgroup ble_flash_module Flash Manager
 * @{
 * @ingroup ble_sdk_lib
 * @brief Module for accessing flash memory.
 *
 * @details It contains functions for reading, writing and erasing one page in flash.
 *
 *          The module uses the first 32 bits of the flash page to write a magic number in order to
 *          determine if the page has been written or not.
 *
 * @note Be careful not to use a page number in the SoftDevice area (which currently occupies the
 *       range 0 to 127), or in your application space! In both cases, this would end up
 *       with a hard fault.
 */

#ifndef BLE_FLASH_H__
#define BLE_FLASH_H__

#include <stdint.h>
#include <stdbool.h>
#include "nrf.h"

#ifdef __cplusplus
extern "C" {
#endif

#define BLE_FLASH_PAGE_SIZE     ((uint16_t)NRF_FICR->CODEPAGESIZE)  /**< Size of one flash page. */
#define BLE_FLASH_MAGIC_NUMBER  0x45DE0000                          /**< Magic value to identify if flash contains valid data. */
#define BLE_FLASH_EMPTY_MASK    0xFFFFFFFF                          /**< Bit mask that defines an empty address in flash. */


/**@brief Macro for getting the end of the flash available for application.
 *
 * @details    The result flash page number indicates the end boundary of the flash available
 *             to the application. If a bootloader is used, the end will be the start of the
 *             bootloader region. Otherwise, the end will be the size of the flash.
 */
#define BLE_FLASH_PAGE_END \
    ((NRF_UICR->NRFFW[0] != BLE_FLASH_EMPTY_MASK) \
        ? (NRF_UICR->NRFFW[0] / BLE_FLASH_PAGE_SIZE) \
        : NRF_FICR->CODESIZE)

/**@brief Function for erasing the specified flash page, and then writes the given data to this page.
 *
 * @warning This operation blocks the CPU. DO NOT use while in a connection!
 *
 * @param[in]  page_num     Page number to update.
 * @param[in]  p_in_array   Pointer to a RAM area containing the elements to write in flash.
 *                          This area has to be 32 bits aligned.
 * @param[in]  word_count   Number of 32 bits words to write in flash.
 *
 * @return     NRF_SUCCESS on successful flash write, otherwise an error code.
 */
uint32_t ble_flash_page_write(uint8_t page_num, uint32_t * p_in_array, uint8_t word_count);

/**@brief Function for reading data from flash to RAM.
 *
 * @param[in]  page_num       Page number to read.
 * @param[out] p_out_array    Pointer to a RAM area where the found data will be written.
 *                            This area has to be 32 bits aligned.
 * @param[out] p_word_count   Number of 32 bits words read.
 *
 * @return     NRF_SUCCESS on successful upload, NRF_ERROR_NOT_FOUND if no valid data has been found
 *             in flash (first 32 bits not equal to the MAGIC_NUMBER + CRC).
 */
uint32_t ble_flash_page_read(uint8_t page_num, uint32_t * p_out_array, uint8_t * p_word_count);

/**@brief Function for erasing a flash page.
 *
 * @note This operation blocks the CPU, so it should not be done while the radio is running!
 *
 * @param[in]  page_num   Page number to erase.
 *
 * @return     NRF_SUCCESS on success, an error_code otherwise.
 */
uint32_t ble_flash_page_erase(uint8_t page_num);

/**@brief Function for writing one word to flash.
 *
 * @note Flash location to be written must have been erased previously.
 *
 * @param[in]  p_address   Pointer to flash location to be written.
 * @param[in]  value       Value to write to flash.
 *
 * @return     NRF_SUCCESS.
 */
uint32_t ble_flash_word_write(uint32_t * p_address, uint32_t value);

/**@brief Function for writing a data block to flash.
 *
 * @note Flash locations to be written must have been erased previously.
 *
 * @param[in]  p_address    Pointer to start of flash location to be written.
 * @param[in]  p_in_array   Pointer to start of flash block to be written.
 * @param[in]  word_count   Number of words to be written.
 *
 * @return     NRF_SUCCESS.
 */
uint32_t ble_flash_block_write(uint32_t * p_address, uint32_t * p_in_array, uint16_t word_count);

/**@brief Function for computing pointer to start of specified flash page.
 *
 * @param[in]  page_num       Page number.
 * @param[out] pp_page_addr   Pointer to start of flash page.
 *
 * @return     NRF_SUCCESS.
 */
uint32_t ble_flash_page_addr(uint8_t page_num, uint32_t ** pp_page_addr);

/**@brief Function for calculating a 16 bit CRC using the CRC-16-CCITT scheme.
 *
 * @param[in]  p_data   Pointer to data on which the CRC is to be calulated.
 * @param[in]  size     Number of bytes on which the CRC is to be calulated.
 * @param[in]  p_crc    Initial CRC value (if NULL, a preset value is used as the initial value).
 *
 * @return     Calculated CRC.
 */
uint16_t ble_flash_crc16_compute(uint8_t * p_data, uint16_t size, uint16_t * p_crc);

/**@brief Function for handling flashing module Radio Notification event.
 *
 * @note For flash writing to work safely while in a connection or while advertising, this function
 *       MUST be called from the Radio Notification module's event handler (see
 *       @ref ble_radio_notification for details).
 *
 * @param[in]  radio_active   TRUE if radio is active (or about to become active), FALSE otherwise.
 */
void ble_flash_on_radio_active_evt(bool radio_active);


#ifdef __cplusplus
}
#endif

#endif // BLE_FLASH_H__

/** @} */